HD and Custom Motorcycle Service and Repair at Reasonable Rates! What is in a Service by HCC?

*** Note: There may be other points to make or some points may not apply to your model. We follow all guidelines and steps in the HD Service manuals specifically for your model. Keep in mind a full service is checking, adjusting and lubricating specific systems and parts that do not show up on your service order invoice. That is in the labor hours noted on your invoice.

  • Battery condition checked (voltage and CCA)
  • Charging system checked
  • Engine oil replaced every 5,000 miles
  • Engine oil filter replaced every 5,000 miles
  • Primary chain tension checked and corrected if needed
  • Primary chain oil replaced every 5,000 miles
  • Clutch adjustment, cable and pushrod
  • Transmission oil replaced every 5,000 miles
  • Tire condition and pressure checked
  • Wheel spokes checked and corrected if needed
  • Steering fall-away checked and corrected if needed
  • Steering head bearings lubricated every 10,000 miles
  • Brake fluid level and type checked, bleeding is extra
  • Brake pads and rotors checked, pads are not included if worn
  • Drive belt or chain checked for deflection and corrected if needed
  • Rear shocks checked
  • Air cleaner cleaned and re-oiled if applicable, paper or disposable filters not included
  • Fuel/oil lines inspected
  • Enrichner/choke control checked and corrected if needed
  • Throttle/idle/clutch cables inspected, lubricated and adjusted
  • Spark plugs replaced every 10,000 miles
  • All electrical components checked, failed bulbs are not included
  • Engine idle speed checked and corrected if needed
  • Critical fasteners checked every 10,000 miles
  • Front fork oil replace every 20,000 miles
  • Road test
  • Services we offer…

    Tow rates: $80 for a tow to the shop. If your service bill is over $200 then towing is 1/2 price and if your service bill is over $400 then towing is free.

    We offer a service plan that follows H-D warranty guidelines and keeps your warranty intact. Our prices are reasonable and affordable compared to other shops and dealers. You’ll see a list below of our services and pricing. We do repairs, to OEM replacement and aftermarket parts. We work with the major insurance companies to get your ride back on the road. We detail bikes too.

     

    These are our regular prices! See discounts below.

    Scheduled Maintenance for Sportster/Evolution, Twin-Cam and V-Rod

    Engine Type

    Twin Cam 88

    Twin Cam 88 w/Synthetic

    V-Rod

    V-Rod w/Synthetic

    Sportster/Evolution

    Sportster/Evolution w/Synthetic

    1K

    $200

    $225

    $200

    $225

    $225

    $250

    5K

    $200

    $225

    $200

    $225

    $225

    $250

    10K

    $225

    $250

    $250

    $275

    $275

    $300

    20K

    $275

    $300

    $250

    $275

    $275

    $300

    Specials

    We are also starting a HCC Membership of Silver, Gold and Platinum members. When your combined purchases for life reach the following levels: (cannot be combined with other discounts or offers)

    Silver = $2,000

    *5% off Parts

    Gold = $5,000

    *10% off Parts

    Platinum = $10,000

    *15% off Parts

    Membership percentages DO NOT APPLY to Engines, Front Fork Assemblies, Motorcycle Frames, Transmissions and/or Custom Built Bikes or Bike Kits. If you refer someone to us and they make a purchase of $50.00 or more, we will credit your account $5.00 for each referral. Please have them mention your name!

     

                                                        95" Big Bore/510G S&S Gear Cams for TC88 1999-2006

    Combined price = $2046.90

    103" Big Bore/510G S&S Gear Cams for TC96 2006 Dyna/2007-09 models

    Combined price =$2190.90

    Does not include Stage 1 A/C, Pipes, Fuel Management System or valve spring upgrade.

    Zipper's Performance Thunder-Max ECM w/Auto Tuner

    Parts only = $899.95

    Tune your bike without a Dyno!

    HD CV Carb Rework/Jetting Labor/Parts = $100

    Get your CV working right, no cough or dead spot on acceleration!

     

    S&S Gear Drive Cams (510G/570G)

    99-06 TC except 06 Dyna

    Gear Cams, Bearings and Gaskets = $755.95

    06 Dyna/07-09 TC

    Gear Cams, Bearings and Gaskets = $ 781.95

    Quick install pushrods = $140

    6 hours of Labor = $300

    Total = $1195.95 (99-06 TC)

    Total = $1221.95 (06 Dyna/07-09 TC)

    510G recommended for our application of Big Bore 95"

    570G recommended for our application of Big Bore 103"

    570G cams require .600 lift valve springs = $175 - 250 and cost of disassembly of your Heads/Cylinders

    95" Big Bore TC88/TC96

    Bore Cylinders = $200

    KB Machined Pistons (High Strength, T-6, Heat Treated, 390 Hypereutectic Alloy = $230.95

    *** TC96 to 103 Pistons add $30 ***

    Gasket Set, Oil Filter, Standard Oil replacement (for Break-In Period) = $120

    6 hours labor = $300

    Total = $850.95 - TC88

    Total = $880.95 - TC96

    Recommend the Big Bore for the 570G Cam Upgrade.

    Disclaimer: All prices and information on this website are subject to change. At no time will the Webmaster or Shop owning this website be held responsible for Human or Publication errors. All prices are before Florida State Sales Tax.

    Copyright ©2006-2011 Hedonist Custom Cycles.com All Rights Reserved

    http://www.hedonistcustomcycles.com/e-Shop/ProdList.asp